logoi.gif (12782 bytes)

PlatoŽ - Stat Products
Permanently Static Dissipative Products
PLATOŽ-STAT PERMANENTLY STATIC DISSIPATIVE PRODUCTS PROVIDE ELECTROSTATIC DISCHARGE PROTECTION.

Meets MIL-STD-2000 (J-STD-001B)

   ¤  

 Protects voltage sensitive devices from static discharge.
   ¤   Meets the requirements of DOD-STD-1686 for containers.
   ¤  Physical characteristics comply with MIL-B-81705, Type 2.
   ¤  Made of permanently static dissipative plastic material.
   ¤   Test samples are available at no extra charge to test the compatibility of liquids used.

9.gif (42469 bytes)
Part No.

Description

Use
SF-01 Flux dispenser, 2oz. (59ml), .010" (.25mm) ID capillary, 1" (25mm) long. Dispense water base fluxes, low viscosity liquids.
SF-02 Flux dispenser, 2oz. (59ml), .020" (.5mm) ID capillary, 1" (25mm) long. Dispense rosin fluxes, lubricants, cleaners, adhesives.
SF-B2HS Scrub brush for spot cleaning, 2oz (59ml).  Brush is soft, natural horse hair. Soft to medium stiffness, durable and works well for flux removal and general cleaning.
SF-B2HH Scrub brush for spot cleaning, 2oz (59ml).  Brush is soft, natural hog bristle. Medium to stiff bristle that works well for removing difficult, sticky, crusty, or viscous materials.
SF-4 Solvent Dispenser Sleeve, 4oz (118ml). Fits over solvent dispenser.
SF-6 Solvent Dispenser Sleeve, 6oz (177ml). Fits over solvent dispenser.
SF-8 Solvent Dispenser Sleeve, 8oz (237ml). Fits over solvent dispenser.
SF-401 Bottle and spout, 4oz (118ml). Dispense liquids.
SF-801 Bottle and spout, 8oz (237ml). Dispense liquids.
SF-1601 Bottle and spout, 16oz (473ml). Dispense liquids.
SF-250 Bottle and nozzle, 8oz (237ml). Dispense liquids.
170SD Platoshear Lead Cutters with static dissipative grips. Flush cut leads as large as 18 AWG (.04"/1mm).
175SD Platoshear Lead Cutters with static dissipative grips and safety guard to reduce risk of lead fly-off. Flush cut leads as large as 18 AWG (.04"/1mm).

 
PLATOŽ-STAT PERMANENTLY
STATIC DISSPATIVE PLASTIC
Electrical Properties
Surface Resistivity: 1 x 107 - 1 x 109 ohm/sq.
Volume Resistivity: 1 x 107 - 1 x 109 ohm/cm.
Static Decay
    (Cond. 24 hrs. @ 72°F, 15% RH)
5 KV to 0.5 KV (NFPA 56A): less than 0.02 sec.
5 KV to 0.5 KV (FTS 101/4046): less than 0.02 sec.
Triboelectric Charge: none
Solvent Resistance
Hexane: 1.04 x 10-1  g/m2 hydrocarbon
Acetone: 2.34 x 10-1  g/m2 hydrocarbon
IPA (Isopropyl Alcohol) 5.0 x 10-3  g/m2   hydrocarbon
Clean Room Particulate Generation
5.0 micron particles: 152 / ft3 air/max
0.5 micron particles: 31 / ft3  air/max
Contact Contamination: 2 micrograms / 25 cm2 hydrocarbon
Silicones: none
Sulfides: none
Chlorides: none
Metallization: none
Tertiary Amines: none
Physical Characteristics
Military Specifications: complies with MIL-B-82705, Type 2
Color: gray
Clean Room Criteria: meets Class 10,000
The above product information was supplied by the manufacturer of the static dissipative plastic.   Further information is available upon request.

 

Plato Sales Department
CopyrightŠ 2004 Tech Spray, L. P. All Rights Reserved.
 PO Box 949 Amarillo, TX  79105 USA.
 (800) 858-4043 / (806) 372-8523
 Fax (806) 372-8750

Return to previous page

Plato Home Page/ Plato Distributors/ Order Plato Catalog/ Product Guide/ Technical Information/ Email Plato